Cleaner air guidance. Practical comparisons. Smarter recommendations.
Independent Guides Practical Comparisons Better Breathing
SEARCH AIRPURIFIERFAQ

What can we help you find?

Filters

Coway Airmega 150 Replacement Filter Guide

Quick replacement answer

OEM part: Coway Airmega AP-1512HH & 200M Filter Replacement Set (commonly referenced as part number 3304899). The set contains a True HEPA filter and a deodorization/carbon pre‑filter. Suggested intervals: True HEPA ≈ 12 months; carbon/deodorization pre‑filter ≈ 6 months under typical home use (replace more often in smoky, dusty, or pet‑heavy environments). Always confirm the model sticker on your unit (AP‑1512HH / Airmega 150) before buying.

What the Airmega 150 actually uses

The Coway Airmega 150 (sold in some markets as AP‑1512HH) uses a two‑part replaceable filter system: a washable or disposable carbon/deodorization pre‑filter that traps larger particles and odors, and a True HEPA main filter for fine particles. Coway’s official replacement pack for the AP‑1512HH / Airmega 150 is listed as a True HEPA + pre‑filter set (part referenced in listings as 3304899). Coway’s product description notes the True HEPA lifetime at roughly 12 months and the carbon pre‑filter at roughly 6 months.

Confirming model: if the sticker on the back of your unit shows AP‑1512HH, AP‑1512HHS, or Airmega 150 (some sellers group the 200M as compatible), the filters in the Coway AP‑1512HH replacement family match. If your label shows a different model, check that model’s guide at AirPurifierFAQ’s filter index or the model’s specific replacement page (see /filters/coway-ap-1512hh-replacement-filter/).

OEM vs vetted generics — side‑by‑side

Brand / Listing Compatible models / notes Included filters Seller price (as listed) Seller‑claimed replacement interval / notes
Coway (OEM) AP‑1512HH / Airmega 150 (OEM replacement pack; part 3304899 referenced) True HEPA + Carbon/deodorization pre‑filter $59.79 HEPA ≈ 12 months; Carbon pre‑filter ≈ 6 months (listing)
isinlive (third‑party) Compatible with AP‑1512HH, AP‑1512HHS and 200M; seller references part# 3304899 Activated carbon + pre‑filter (pack includes 2 main filters + 6 carbon pre‑filters per listing) $32.05 Seller recommends HEPA every 12 months and pre‑filter every 6 months (seller guidance)
Fil‑fresh (third‑party) Compatible with AP‑1512HH, AP‑1512HH‑FP, AP‑1518R, AP‑1519P and 200M; replaces 3304899 (seller claim) HEPA + carbon pre‑filter packs (two HEPA + four carbon per listing) $32.99 Listing claims HEPA captures 99.97% at 0.3 μm; recommends regular replacement (seller guidance)

How to decide: OEM or generic

  • Choose OEM when you want Coway‑branded packaging and the manufacturer’s stated specifications and support. OEM is straightforward if warranty, original part labeling, or verified performance matters.
  • Consider vetted generics to reduce cost per filter. Compare the exact pack contents, dimensions, and seller notes—many third‑party packs bundle extra carbon pre‑filters which is good value if you plan to swap pre‑filters twice per HEPA cycle.
  • Check seller claims against the unit label: many generic listings explicitly reference part 3304899 and list dimensions (e.g., isinlive shows filter dimensions and notes compatibility). If dimensions or orientation aren’t stated, request seller confirmation before purchasing.
  • Watch out for listings that omit either the HEPA or the carbon piece; make sure the pack contains the components you expect.

Step‑by‑step replacement (photo plan for editors)

This short procedure is written to pair with five step photos so a reader can complete the swap in one session.

Preparation (Photo 1: unit & new filters laid out)

  • Unplug the purifier. Work on a flat, clean surface large enough for the cover and filters.
  • Lay out the new filters on clean paper or a towel. Have disposable gloves and a mask available if you’re sensitive to dust.
  • Confirm the new HEPA matches the dimensions and shape of the old one (orientation tabs/labels should align).

Open the unit (Photo 2: rear cover removed)

Locate the rear access panel or filter cover. On the Airmega 150 / AP‑1512HH the rear cover typically snaps free when you press the release tabs—no tools required. Set the cover aside with the screws/tabs if present.

Remove old filters (Photo 3: removing old filters)

Grip the carbon/deodorization pre‑filter and pull it out first; then slide out the HEPA filter. Tip the HEPA away from your face—if it is heavily loaded with dust, consider bagging it immediately for disposal.

Install new filters (Photo 4: inserting new pre‑filter then HEPA)

Insert the carbon/deodorization pre‑filter first (if the new set uses a thin carbon sheet, place it in the same orientation as the old). Slide the True HEPA filter into the main slot with the printed side or arrows facing the same way the old filter did. Ensure each filter seats flush and there are no gaps.

Close, reset, and quick test (Photo 5: reset button / unit running)

  • Reinstall the cover until it snaps into place. Plug the unit back in.
  • Reset the filter‑change indicator according to the manual: most units have a filter reset or indicator button—press and hold until the indicator resets (consult your unit manual if unsure).
  • Run the purifier on low for a few minutes to clear any loose dust and confirm normal fan sound.

Troubleshooting & practical tips

  • If the unit displays a persistent filter alert after replacement, power‑cycle the purifier and repeat the reset procedure; if it persists, verify filter orientation and seating.
  • Do not wash disposable True HEPA filters. Washing can damage the media and void any performance claims.
  • Keep a spare carbon pre‑filter on hand: because the pre‑filter life is shorter (~6 months), third‑party multi‑packs can be convenient.
  • Dispose of used filters in household trash unless local regulations require special handling for heavily contaminated filters (e.g., wildfire soot or chemical exposure).

Where to buy (short affiliate note)

Common merchants carry both the Coway OEM pack and vetted generics—Amazon is a frequent source for both OEM and third‑party replacement kits. When purchasing, verify the listing shows compatibility with AP‑1512HH / Airmega 150 (or references part 3304899) and confirms the pack contents you need.

For model details and performance context see our review of the Coway Airmega 150 (/reviews/coway-airmega-150/). If you want a broader view of filter options across models, visit the Air Purifier Replacement Filter Guide (/filters/).

FAQ

Questions buyers often ask

What replacement filter does the Coway Airmega 150 use?

The Airmega 150 (AP-1512HH / AP-1512HHS) uses a two-part replacement set (referenced as part 3304899): a True HEPA main filter and a carbon/deodorization pre-filter. Coway recommends replacing the True HEPA at ~12 months and the carbon pre-filter at ~6 months under typical home use.

How can I confirm my unit model before buying filters?

Check the sticker on the back of your unit. If it shows AP-1512HH, AP-1512HHS, or Airmega 150, the 3304899 replacement family matches. Some sellers list the 200M as compatible. If the label shows a different model, verify that model’s guide on AirPurifierFAQ’s filter index or the AP-1512HH replacement page (/filters/coway-ap-1512hh-replacement-filter/).

Can I wash the True HEPA filter or the carbon pre-filter?

Do not wash disposable True HEPA filters—washing can damage the media and void performance claims. The carbon/deodorization pre-filter may be washable or disposable depending on the version; check your unit manual or the replacement listing to confirm. If unsure, treat the HEPA as non-washable and replace it when due.

How do I reset the filter-change indicator after replacing filters?

After installing the new pre-filter and HEPA, reinstall the cover and plug the unit in. Use the unit’s filter reset/indicator button—press and hold until the indicator clears (consult your manual if unsure). If the alert persists, power-cycle the purifier and repeat the reset; also verify proper filter orientation and seating.

What should I check when buying third-party (vetted generic) filters?

Compare exact pack contents (both HEPA and carbon pre-filter), dimensions, and orientation. Prefer listings that reference part 3304899 and list dimensions. If dimensions or orientation aren’t stated, request seller confirmation. Watch out for listings that omit either the HEPA or the carbon piece and verify how many pre-filters are included.

How often should I replace the carbon pre-filter and should I keep spares?

Replace the carbon/deodorization pre-filter at about ~6 months under normal use; replace it more frequently in smoky, dusty, or pet-heavy environments. Keeping spare pre-filters is practical because they wear faster than the HEPA. Dispose of used filters in household trash unless local rules require special handling for heavily contaminated filters.

AirPurifierFAQ
Logo
Register New Account
Shopping cart